Corsair Hydro X Cooling

Match the fitting size to your tubing (e.g., 10/13mm). Also consider the threading (G1/4) and whether you need angled fittings for tight runs. Start with straight fittings and use 90° or 45° as needed.

Fill the loop slowly with coolant, power the pump via a separate PSU jumper until bubbles dissipate, then top off. Drain and replace coolant every 6-12 months to prevent algae and corrosion.

In iCUE, you can control the pump speed based on coolant temperature. Set a fan curve to optimize noise and cooling. The XD5 pump also supports RGB customization.